A20 buster sunxi-tools

[andyw]

I am using A20-OLinuXino-buster-base-20200701-173923.img

Looking in the latest A20-OLinuXino-Micro.pdf rev S March 2018 manual, page 15 states that you use chscr.sh and wrscr.sh to convert the fex files.

These are not present - is there an update to add these?

Thanks

Andy.

[LubOlimex]

These tools are not available because there are no fex files in mainline images. They use overlays like these to describe the hardware:

https://github.com/OLIMEX/olinuxino-overlays/tree/upstream/sun7i-a20

[andyw]

OK!

Thanks

Andy.

[LubOlimex]

If you wish to change some of the settings try the following scripts inside the image:

~#olinuxino-display – allows setting different video output;

~#olinuxino-overlay – provides easy way to enable or disable different hardware assignments – different I2C, SPI, UART, CAN, PWM, etc;

~#olinuxino-sd-to-emmc – allows booting from eMMC; transfers the Linux file system from the card to the eMMC memory (if your board has one); boot is placed in SPI flash memory;

~#olinuxino-sd-to-sata – allows booting from the SATA disk; transfers the Linux file system from the card to external SATA disk; boot is placed in SPI flash memory.