New building tool

[arjepsen]

I can see that there's a new building tool put up on github:
https://github.com/OLIMEX/olimage

It would be awesome if there would be a bit of information about how to use it exactly :-)

Best regards.

[LubOlimex]

I guess here:

https://github.com/OLIMEX/olimage/blob/master/build.sh

Let me know if that is what you needed.

[arjepsen]

Thanks, but not entirely.
I do a:
git clone https://github.com/olimex/olimage

in the olimage directory, only mount.sh is executable..?
so I change the permissions for build.sh, and run it:
sudo ./build.sh

it runs a bit, but ends with:
docker: Error response from daemon: OCI runtime create failed: container_linux.go:367: starting container process caused: process_linux.go:495: container init caused: open /dev/ptmx: no such device: unknown.

[LubOlimex]

What board do you want to compile for?

[arjepsen]

A13 (som-512)

[LubOlimex]

The issue you report seems to be related to docker installation. However, the command to compile for A13 boards would be:

bash run.sh -v image A13-OLinuXino buster minimal A13-OLinuXino-buster-minimal-$(date +%Y%m%d-%H%M%S).img

This builds the test image.

For release you would need to run:

env ARGS=-r bash run.sh -v image A13-OLinuXino buster minimal A13-OLinuXino-buster-minimal-$(date +%Y%m%d-%H%M%S).img

[arjepsen]

Thanks a lot.

Code Select Expand

bash run.sh -v image A13-OLinuXino buster minimal A13-OLinuXino-buster-minimal-$(date +%Y%m%d-%H%M%S).img
This worked well.