What kind of hexagonal spacers uses the case for AgonLight2 ?

Started by Adrian.VT, October 28, 2024, 10:26:25 AM

Previous topic - Next topic

Adrian.VT

I have ordered an AgonLight2 board and its case, but unfortunately the case arrived without the 4 hexagonal spacers which I suppose that should be shipped along, then I am unable to mount the board in its case.

I am quite disappointed that the case arrived without all accessories, BUT I did not made this post just to lament - I opened it to try to find a way to get these missing hexagonal spacers.

So, my question is what kind of hexagonal spacers are used in this case, and if I can order them separately.

Eventually, just their exact dimensions can be useful for me.

LubOlimex

Sorry for this, it is rare for the guys in the packing to miss components during packing.

These are metallic M3x6mm female-female hexagonal stand-offs. Refer to the picture on how they look:



The screws that are used for them are DIN7985 M3x4mm
Technical support and documentation manager at Olimex

Adrian.VT

Thank you for the fast response!

Then, I should understand that will work the hexagonal spacers which can be ordered from the link bellow?

https://www.olimex.com/Products/Components/Fasteners/HEX-SPACER-M3X6/

With the case arrived 8 screws, which I think they are all needed.


LubOlimex

Yes, exactly. These are the spacers, the page also has better dimensions. The BOX-AGONLIGHT2-BLACK kit should include 4 of those. But maybe first check for similar spacer in a general hardware shop around you to save on the shipping.
Technical support and documentation manager at Olimex

Adrian.VT

Again, thanks for your fast response!

Now I know what I should look for.