ESP32-POE-WROVER

[cbrake]

We are using the ESP32-POE-WROVER with Zephyr and trying to get the clock coming out GPIO0. Do you have and code you can point me to that shows how to do this?

Here is the Zephyr board support we are working on for the ESP32-POE-*

https://github.com/simpleiot/zephyr-siot/tree/main/boards

[LubOlimex]

I see you've added GPIO0 but did you account for the PHY power pin? There is PHY power enable pin GPIO12. Check component "T1" in the schematic.

A lot of other ESP32 boards use GPIO0 for Ethernet clock, maybe if there is already config for another ESP32 board with Ethernet, use that as base just edit the definitions.