View source for ICE40HX1K-EVB

[[File:iCE40HX1K-EVB.jpg]]

== Documents ==
[http://www.latticesemi.com/~/media/LatticeSemi/Documents/ProductBrochures/NZ/ProductSelectorGuide.PDF Product Selection Guilde]

[http://www.latticesemi.com/~/media/LatticeSemi/Documents/Handbooks/iCE40FamilyHandbook.pdf iCE40 Family Handbook]

[http://www.latticesemi.com/~/media/LatticeSemi/Documents/DataSheets/iCE/iCE40LPHXFamilyDataSheet.pdf iCE40 datasheet]

== Hardware ==
[https://github.com/OLIMEX/iCE40HX1K-EVB GitHub repository with the hardware files]

iCE40HX1K-EVB programming connector

[[File:iCE40PGM.jpg|650px]]

iCE40HX1K-EVB 34-pin bus connector

[[File:iCE40BUS.jpg|650px]]

== Software ==

=== Get started under Linux ===

To develop with iCE40HX1K-EVB you need:
    iCE40HX1K-EVB
    OLIMEXINO-32U4 as programmer (or any other Arduino compatible board)
    IDC10-15cm cable to connect iCE40HX1K-EVB with OLIMEXINO-32U4
    SY0605E 5V power supply adapter
    USB-MINI cable
    optional but recommended USB-ISO


====Installing Icestorm FOSS tools for iCE40====


First we need to install the tools necessary to build Icestorm:

    sudo apt-get install build-essential clang bison flex libreadline-dev \
                     gawk tcl-dev libffi-dev git mercurial graphviz   \
                     xdot pkg-config python python3 libftdi-dev

Installing the IceStorm Tools (icepack, icebox, iceprog, icetime, chip databases):

    git clone https://github.com/cliffordwolf/icestorm.git icestorm
    cd icestorm
    make -j$(nproc)
    sudo make install

Installing Arachne-PNR (the place&route tool):

    git clone https://github.com/cseed/arachne-pnr.git arachne-pnr
    cd arachne-pnr
    make -j$(nproc)
    sudo make install

Installing Yosys (Verilog synthesis):

    git clone https://github.com/cliffordwolf/yosys.git yosys
    cd yosys
    make -j$(nproc)
    sudo make install

The Arachne-PNR build converts the IceStorm text chip databases into the arachne-pnr binary chip databases. Always rebuild Arachne-PNR after updating your IceStorm installation.

Notes for Archlinux: just install icestorm-git, arachne-pnr-git and yosys-git from the Arch User Repository (no need to follow the install instructions above).


====Preparing OLIMEXINO-32U4 as programmer====


Download latest [https://www.arduino.cc/en/Main/Software Arduino IDE] we recommend you to use the one from Arduino.cc current revision is 1.6.9. 

Copy iceprog.ino sketch from GitHub/iCE40HX1K-EVB/programmer/olimexino-32u4 firmware to examples folder.

Plug the USB cable to OLIMEXINO-32U4 and start the Arduino IDE

    cd arduino-1.6.9
    sudo ./arduino

From Tools select 'Arduino Leonardo' as board.

From same menu select the PORT where the board is attached it will be something like: '/dev/ttyACM0 (Arduino Leonardo)' or '/dev/ttyUSB0 (Arduino Leonardo)'

Open the iceprog.ino sketch

From menu Sketch-Include library-Manage libraries check if you have SPI and SPIFlash libraries installed if not install them.

Compile and Upload the sketch.

If everything complete without error now you have OLIMEXINO-32U4 set as iCE40HX1K-EVB programmer!


====Add iceprogduino to IceStorm====

Copy iceprogduino folder from GitHub [https://github.com/OLIMEX/iCE40HX1K-EVB/programmer programmer] to icestorm and build it

    cd icestorm/iceprogduino
    make clean
    make
    sudo cp iceprogduino /usr/local/bin

====Make LED blink with IceStorm====


Copy from GitHub ice40hx1k-evb to icestorm/examples then

    cd icestorm/examples/ice40hx1k-evb
    make
    sudo ../../iceprogduino/iceprogduino example.bin

LED1 and LED2 should start blink which means the code is successfully loaded

=== Get started under Windows ===

== Projects ==
Under construction

== FAQ ==
Under construction

[[Category:FPGA]]