≡
Difference between revisions of "A33-OLinuXino"
(Created page with "Features: *A33 Quad Core Cortex-A7 running at 1.2Ghz *1GB DDR3 RAM memory running at 432Mhz/360MHz *4GB NAND flash memory (only availabe in A33-OLinuXino-4GB) *USB-OTG *AXP22...") |
|||
| Line 2: | Line 2: | ||
*A33 Quad Core Cortex-A7 running at 1.2Ghz | *A33 Quad Core Cortex-A7 running at 1.2Ghz | ||
| − | *1GB DDR3 RAM memory running at 432Mhz/ | + | *1GB DDR3 RAM memory running at 432Mhz/360Mhz |
| − | *4GB NAND flash memory | + | *4GB NAND flash memory |
| − | *USB- | + | *USB On-The-Go interface on USB mini connector |
*AXP223 PMU | *AXP223 PMU | ||
*Debug UART connector | *Debug UART connector | ||
| − | * | + | *Li-Po battery operation with buit-in charger |
| − | *Step-up converter | + | *Step-up converter allows all peripherals including USB hosts to work properly on Li-Po battery power |
*Audio input for microphone | *Audio input for microphone | ||
*Audio output for headphones | *Audio output for headphones | ||
Revision as of 04:51, 26 September 2016
Features:
- A33 Quad Core Cortex-A7 running at 1.2Ghz
- 1GB DDR3 RAM memory running at 432Mhz/360Mhz
- 4GB NAND flash memory
- USB On-The-Go interface on USB mini connector
- AXP223 PMU
- Debug UART connector
- Li-Po battery operation with buit-in charger
- Step-up converter allows all peripherals including USB hosts to work properly on Li-Po battery power
- Audio input for microphone
- Audio output for headphones
- Camera CSI / LCD MIPI 40 pin FPC connector
- LCD 0.1" step 40 pin connector (not assembled on board)
- GPIO 0.1" step 40 pin connector (not assembled on board)
- Barrel power jack for external 5V supply
- PCB dimensions: 66 x 71 mm
- Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted.
