Difference between revisions of "RK3328-SOM204"

m (FAQ)
m (Flash image)
 
(6 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
=== Armbian ===
 
=== Armbian ===
 
== FAQ ==
 
== FAQ ==
 +
=== Use alarm clock ===
 +
 +
You can schedule power-on event using alarm clock.
 +
 +
Set the alarm 1 minute in the future
 +
  echo $(date '+%s' -d '+ 1 minutes') > /sys/class/rtc/rtc0/wakealarm
 +
 +
Now power-off the board and wait for the wake-up alarm:
 +
  poweroff
 +
 
=== Flash image to eMMC via USB ===
 
=== Flash image to eMMC via USB ===
 +
 +
==== Prepare rkdeveloptool ====
  
 
Get sources:
 
Get sources:
Line 15: Line 27:
 
   ./configure
 
   ./configure
 
   make
 
   make
 +
 +
==== Prepare loader ====
 +
 +
Get rkbin:
 +
  git clone https://github.com/rockchip-linux/rkbin
 +
 +
Edit configuration:
 +
  cd rkbin
 +
  cat > RKBOOT/RK3328MINIALL.ini << __EOF__
 +
  [CHIP_NAME]
 +
  NAME=RK322H
 +
  [VERSION]
 +
  MAJOR=2
 +
  MINOR=49
 +
  [CODE471_OPTION]
 +
  NUM=1
 +
  Path1=bin/rk33/rk3328_ddr_333MHz_v1.14.bin
 +
  Sleep=1
 +
  [CODE472_OPTION]
 +
  NUM=1
 +
  Path1=bin/rk33/rk322xh_usbplug_v2.49.bin
 +
  [LOADER_OPTION]
 +
  NUM=2
 +
  LOADER1=FlashData
 +
  LOADER2=FlashBoot
 +
  FlashData=bin/rk33/rk3328_ddr_333MHz_v1.14.bin
 +
  FlashBoot=bin/rk33/rk322xh_miniloader_v2.49.bin
 +
  [OUTPUT]
 +
  PATH=rk3328_loader_v1.14.249.bin
 +
  __EOF__
 +
 +
Generate loader image:
 +
  ./tools/boot_merger RKBOOT/RK3328MINIALL.ini
 +
 +
==== Flash image ====
 +
Put device into loader mode. Plug USB-mini cable, hold '''recovery''' button and
 +
press '''reset'''. Check the with:
 +
  lsusb
 +
 +
You should see:
 +
  Bus 002 Device 035: ID 2207:330a
 +
 +
Go to rkdevelop folder:
 +
  cd /path/to/rkdeveloptool
 +
 +
Check devices:
 +
  sudo rkdeveloptool ld
 +
  DevNo=1 Vid=0x2207,Pid=0x330a,LocationID=208 Maskrom
 +
 +
Upload loader:
 +
  sudo rkdeveloptool db /path/to/rk3328_loader_v1.14.249.bin
 +
 +
In the terminal you should see (baudrate is '''1500000'''):
 +
  DDR version 1.14 20190328
 +
  ID:0x805 N
 +
  In
 +
  LPDDR3
 +
  333MHz
 +
  Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
 +
  ddrconfig:6
 +
  OUT
 +
  Boot1 Release Time: Sep  7 2018 15:48:25, version: 2.49
 +
  SdmmcInit=0 NOT PRESENT
 +
  mmc Ext_csd, ret=0 ,
 +
  Ext[226]=20, bootSize=2000,
 +
  Ext[215]=1, Ext[214]=d1, Ext[213]=f0, Ext[212]=0,cap=1d1f000 REL=1f
 +
  mmc2:cmd19,100
 +
  SdmmcInit=2 0
 +
  BootCapSize=2000
 +
  UserCapSize=14910MB
 +
  FwPartOffset=2000 , 2000
 +
  UsbHook 736999
 +
  powerOn 737075
 +
 +
Erase the flash:
 +
  sudo rkdeveloptool ef
 +
 +
Flash a new image:
 +
  sudo rkdeveloptool wl 0 /path/to/some/image.img

Latest revision as of 22:25, 16 June 2019

Software

Armbian

FAQ

Use alarm clock

You can schedule power-on event using alarm clock.

Set the alarm 1 minute in the future

 echo $(date '+%s' -d '+ 1 minutes') > /sys/class/rtc/rtc0/wakealarm

Now power-off the board and wait for the wake-up alarm:

 poweroff

Flash image to eMMC via USB

Prepare rkdeveloptool

Get sources:

 git clone https://github.com/rockchip-linux/rkdeveloptool

Install requirements:

 sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf

Build rkdeveloptool

 cd rkdeveloptool
 autoreconf -i
 ./configure
 make

Prepare loader

Get rkbin:

 git clone https://github.com/rockchip-linux/rkbin

Edit configuration:

 cd rkbin
 cat > RKBOOT/RK3328MINIALL.ini << __EOF__
 [CHIP_NAME]
 NAME=RK322H
 [VERSION]
 MAJOR=2
 MINOR=49
 [CODE471_OPTION]
 NUM=1
 Path1=bin/rk33/rk3328_ddr_333MHz_v1.14.bin
 Sleep=1
 [CODE472_OPTION]
 NUM=1
 Path1=bin/rk33/rk322xh_usbplug_v2.49.bin
 [LOADER_OPTION]
 NUM=2
 LOADER1=FlashData
 LOADER2=FlashBoot
 FlashData=bin/rk33/rk3328_ddr_333MHz_v1.14.bin
 FlashBoot=bin/rk33/rk322xh_miniloader_v2.49.bin
 [OUTPUT]
 PATH=rk3328_loader_v1.14.249.bin
 __EOF__

Generate loader image:

 ./tools/boot_merger RKBOOT/RK3328MINIALL.ini

Flash image

Put device into loader mode. Plug USB-mini cable, hold recovery button and press reset. Check the with:

 lsusb

You should see:

 Bus 002 Device 035: ID 2207:330a

Go to rkdevelop folder:

 cd /path/to/rkdeveloptool

Check devices:

 sudo rkdeveloptool ld
 DevNo=1	Vid=0x2207,Pid=0x330a,LocationID=208	Maskrom

Upload loader:

 sudo rkdeveloptool db /path/to/rk3328_loader_v1.14.249.bin

In the terminal you should see (baudrate is 1500000):

 DDR version 1.14 20190328
 ID:0x805 N
 In
 LPDDR3
 333MHz
 Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
 ddrconfig:6
 OUT
 Boot1 Release Time: Sep  7 2018 15:48:25, version: 2.49
 SdmmcInit=0 NOT PRESENT
 mmc Ext_csd, ret=0 ,
  Ext[226]=20, bootSize=2000, 
  			Ext[215]=1, Ext[214]=d1, Ext[213]=f0, Ext[212]=0,cap=1d1f000 REL=1f
 mmc2:cmd19,100
 SdmmcInit=2 0
 BootCapSize=2000
 UserCapSize=14910MB
 FwPartOffset=2000 , 2000
 UsbHook 736999
 powerOn 737075

Erase the flash:

 sudo rkdeveloptool ef

Flash a new image:

 sudo rkdeveloptool wl 0 /path/to/some/image.img