How to edit prebuilt Android images

How to edit the parameters in Android distributions

For almost any Olimex Allwinner board there are Android images provided. These are ready-to-use images with all the settings already configured. The images are generally two types: suitable for NAND memory boot of the boards; or suitable for a microSD card boot.

We often get asked to provide Android images with different set of settings or support for custom resolutions. Unfortunately, we are unable to compile Android images for every possible resolution and every possible Alwinner board. This article would provide algorithms that would allow you to edit the Android parameters by yourself.

The easiest approach is to edit an already existing image as explained below. The other method would be to create an Android image from scratch.

Note that the method for editing Android image suitable for NAND memory is completely different compared to the method for editing Android image suitable for microSD card.

The algorithm to edit the Android image for the NAND memory:

 1. Download the latest official Android image for NAND from the wiki article of your board.

 2. Download and extract the program used for editing the parameters of a ready image. The program is called DragonFace. It can be downloaded from here: https://github.com/OLIMEX/OLINUXINO/raw/master/SOFTWARE/dragonface/Dragonface_V2.1.2.zip

 3. Start the program from DragonFace.exe and let it update on first launch. 

 4. After the update is complete and the interface of the program is available click on the "Firmware" button and then load the *.img file that we got in point 1.

During the opening of the firmware additional processes might attempt to start. Windows user account control might prompt for your approval. Make sure that you allow those.

If you receive an error loading the image: ensure that the torrent program or any local or remote program or proccess that might interfere with the image had been closed and the link to the image had been terminated. If the image you are goind to edit is open by another program you will not be able to edit it via DragonFace - the error that usually gets displayed in such a case is: "DragonFace: Firmware does not support the tools to modify, make sure that the firmare version: OK".

 5. After the load is complete navigate to the "Advanced Settings" tab. In the tab select "System Configuration". This would open the configuration in simple text form in your default text editor.

 6. Now we can edit parameters. More information on what the parameters mean and what values they might have is found here: http://linux-sunxi.org/Fex_Guide 

For example, to enable FullHD video output at 60Hz we need to change screen0_output_type and screen0_output_mode as follows:

screen0_output_type = 3

screen0_output_mode = 10, for 60 Hz

Under screen0_xxx_xxx it should be the HDMI settings.

 7. After we are done we save the text file and close it. Then we click the button "Save" at the bottom of the DragonFace interface. A prompt windows would appear and would allow us to specify a save location and name for the edited image.

During the save operation of the firmware additional processes might attempt to start. Windows user account control might prompt for your approval. Make sure that you allow those.

 8. Voila we have an image with custom settings. We are ready to burn it to the NAND memory of the board.