A33-OLinuXino

Board features:

• A33 Quad Core Cortex-A7 running at 1.2Ghz
• 1GB DDR3 RAM memory running at 432Mhz/360Mhz
• 4GB NAND flash memory
• USB On-The-Go interface on USB mini connector
• AXP223 PMU
• Debug UART connector
• Li-Po battery operation with buit-in charger
• Step-up converter allows all peripherals including USB hosts to work properly on Li-Po battery power
• Audio input for microphone
• Audio output for headphones
• Camera CSI / LCD MIPI 40 pin FPC connector
• LCD 0.1" step 40 pin connector (not assembled on board)
• GPIO 0.1" step 40 pin connector (not assembled on board)
• Barrel power jack for external 5V supply
• PCB dimensions: 66 x 71 mm

How To?

How do I write the Linux image to a micro SD card to use with my A33 board?

To write a Linux image to an SD card under Windows we use Win32 Disk Imager):

• Download Win32 Disk Imager Win32 Disk Imager
• Insert card
• Start program
• Select file
• Click "write"

To write a Linux image to an SD card under Linux:

For instance, if you have an image with the file name of "debian_2g.img". It would be downloaded to the SD card connected to a Linux machine using one of the following commands:

• # dd bs=4M oflag=sync if=debian_2g.img of=/dev/sdX

or

• # cp debian_2g.img /dev/sdX

where sdX is the name of the microSD card under Linux.