MOD-RFID1356MIFARE

Revision as of 00:59, 24 May 2016 by StefanM (talk | contribs)

>? MOD-RFID1356MIFARE Brief command list and usage description:

i - information.
? - this help.
b - Switch to bootloader.
erB - Read data in block B.
ewB,X - Write data to block B. X must be hex, maximum 16 bytes.
e0 - Disable eeprom read.
e1 - Enable eeprom write.
mlE - Set led mode to disabled (E=0) or enabled (E=1)
mtF - Set scan interval. Values between 1 and 30000 are accepted.