≡
RPi-UEXT
RPi-UEXT is a T-shaped adapter board which provides interface between the popular Raspberry Pi board and Olimex UEXT modules.
Provides a way of connecting numerous OLIMEX-made modules - sensors, IO boards, timers, biofeedback boards, etc, with Raspberry Pi on hardware level. The board is suitable for breadbording (instead of soldering you can use jumper cables for the GPIO pins).
Price | 3.00 EUR |
---|
IMPORTANT!
This Adapter is for MODEL A and MODEL B 26 pin connector not the new 40 pin RaspberryPi connector.
This Adapter is for MODEL A and MODEL B 26 pin connector not the new 40 pin RaspberryPi connector.
FEATURES
- Raspberry Pi interface connector
- Female UEXT connector = SPI + I2C + UART
- 7 GPIO signals available on male header
- SMD jumpers provided for swap of both chip enable
- Designed with breadboarding spacing in mind
- Dimensions: 60 x 53/10 mm (23.7 x 2.1/0.4")
- Note that both the 26-pin RPi cable and the 10-pin UEXT are sold separately