A13-OLinuXino-MICRO  

A13-OLinuXino-MICRO - Open Source Hardware Board
A13-OLinuXino-MICRO - Open Source Hardware Board A13-OLinuXino-MICRO - Open Source Hardware Board A13-OLinuXino-MICRO - Open Source Hardware Board
Embedded Linux board with A13 ARM SOC 256MB RAM
Price26.00 EUR
10 - 49 pcs24.70 EUR
50 - 10000 pcs23.40 EUR
In Stock

A13-OLinuXino-MICRO is OSHW certified Open Source Hardware with UID BG000045

A13-OLinuXino is a low-cost single-board Linux computer in a very compact form. It uses the very first Cortex A8 processor available in the eLQFP176 package, produced by Allwinner Technology Inc A13.

FEATURES

  • A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 256 MB RAM (128Mbit x 16)
  • 5 VDC input power supply with own ICs, noise immune design
  • 1 USB host
  • 1 USB OTG which can power the board
  • SD-card connector for booting the Linux image
  • VGA video output
  • LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
  • Audio output
  • Microphone input pads (no connector)
  • 1 User key
  • 4 Mount holes
  • UEXT connector for connecting additional UEXT modules like Zigbee, Bluetooth, Relays, etc
  • GPIO connector with 68/74 pins and these signals:
    • 17 for adding NAND flash;
    • 22 for connecting LCDs;
    • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
    • 3x I2C;
    • 2x UARTs;
    • SDIO2 for connecting SDcards and modules;
    • 5 system pins: +5V, +3.3V, GND, RESET, NMI
  • Dimensions: (100 x 85)mm ~ (3.95 x 3.35)"

SOFTWARE

COMMUNITY

FAQ

  • There is only 1 USB host on the board, how can I connect my USB mouse and USB keyboard simultaneously?
  • You should use external USB hub.
  • What software is available for the board?
  • Many Linux distributions working properly with the MICRO, please visit the WIKI and the GitHub pages of A13-OLinuXino-MICRO to find latest images, we officially support Debian for this board.
  • I bought A13-LCD7-TS but when I connect it to the A13-OLinuXino-MICRO I receive no image on the display. What do I do wrong?
  • The default A13-OLinuXino-MICRO image is set for a VGA display and 800x600 resolution. To use LCD with A13-OLinuXino-MICRO you need to upload a new image with the appropriate settings. The download links for the images may be found in the wiki article for A13-OLinuXino-MICRO: https://www.olimex.com/wiki/A13-OLinuXino
  • What is the operating temperature range of A13-OLinuXino?
  • The board works in the commercial temperature range 0+70C
  • I can't find official Olimage release for the A13-OLinuXino-MICRO. What am I missing?
  • A13-OLinuXino-MICRO is not powerful enough to run Olimage properly. The board is suitable for older kernels only.
  • Where can I find the Android image for the A13-OLinuXino-MICRO?
  • At the moment we haven't tested Android booting from a SD card. Android from a SD card is currently not officially supported. However, note that there are people who are reporting success at getting it to run - head to the Olimex forums for more recent info.
  • How long this board will be available?
  • This board will be available forever