iMX233-OLinuXino-NANO  

iMX233-OLinuXino-Nano is OSHW certified Open Source Hardware with UID BG000047

FEATURES

• iMX233 ARM926J processor at 454Mhz
• 64 MB RAM
• SD-card connector for booting the Linux image
• 1 USB High Speed Host
• Three buttons
• UEXT connector for connection of different peripherial modules
• 2 rows at the two sides of the boards  x 25 pinholes - can be used either to access processor features or as GPIOs
• U_DEBUG pin headers
• 3.7V Li-Po battery connector and built-in battery charger
• Breadboard compatible
• JTAG pads for bare-board programming
• PCB dimensions: 3.00" x 0.8" (76.2mm x 20.3mm)
• Nominal dimensions: 3.40'' x 0.8'' (86.4mm x 20.3mm)
• Weight: 0.5 ounce (~14 grams)
• operating temperature 0-70C for iMX233-OLinuXino-NANO
• operating temperature -45+85C for iMX233-OLinuXino-NANO+i

DOCUMENTS

• User's manual
• iMX233-OLinuXino-NANO European Declaration of Conformity
• iMX233-OLinuXino-NANO UKCA Declaration of Conformity

HARDWARE

• GitHub repository with hardware design files and more

SOFTWARE

• Image links, instructions, demo software, customer projects and more might be found at the wiki page: iMX233 article
• GitHub OLINUXINO Project
• Open Embedded Linux Kernel with TV-console and peripherial support, instructions how to make bootable SD-card here
• How to Build Debian distribution instructions here and how to make a bootable SD-card with Debian rootfs here
• How to Build ARCH Linux distribution instructions here
• How to build Linux Kernel with LTIB (obsolete) here
• Open Embedded layer completed with support for iMX233-OLinuXino
• Linux Kernel 3.X support work in progress
• Android build on iMX233 instructions (in Spanish)
• OpenOCD working script for iMX233 - tested with OpenOCD 0.6.0, ARM-USB-TINY-H and iMX233-SJTAG
• BitBurner software - software used for burning the iMX233 fuses
• Emulation of OLinuXino

COMMUNITY

• OLinuXino forum for discussion and community support